Neer Cure for boilers
Action in boiling water
This will complex the ionized metals into non-ionic in the form suspended as well as perceptible solids.
This liquid will penetrate through scales in the boiler and will loosen the same. The un-dissolved scales will be collected at the bottom and removed by blowdown. The unique feature of Neer Cure is that it does not react with the scaling material but removes it in the un-dissolved state.
This liquid replaces all conventional chemicals being dosed in a boiler.
Benefits of using Neer Cure
- Boiler can be operated at pH 7 against the conventional method of operating above 8.5.
- It removes the scale from the system.
- It removes rust from the system
- No metal loss, no new scale and rust formation.
- No need of descaling the boiler.
- Only one liquid replaces all the chemicals now used in the system.
- Heat loss in blow down reduced: energy savings achieved.
- Heating required for make -up water or top up water is avoided: hence fuel savings.
- Constant steam pressure / temperature can be obtained
- No need of softener / D.M Plant / R.O plantsaves : save capital cost as well as recurring expenditure.
Dosing Place
- Neer Cure can be dosed in the feed water of the tank
Dosage
- The dosage varies with the total dissolved solids (TDS) of the feed water.
Observation of Boilers with Neercure
- Changes in colour of blow down samples.
- Increase in pressure needed for the boiler
- Decrease in fuel consumption and water to fuel ratio
- Increase in heat exchange efficiency